Give five compatible low-voltage circuits a name, a switch and a timer in the VEXIAN app. Use Bluetooth nearby for free, or add a hub for optional remote control.
A$129 hardwareNearby BLE: A$0/month. Remote access is included with a compatible hub on Plus or Enterprise. Essential does not support hub-linked relays.
Label each channel for its connected circuit so you know what you're changing—not just “Relay 1”.
Switch individual channels in the app and see the confirmed commanded output state. A connected appliance's actual operation is not independently measured.
Set a timer and see the remaining time in the app. Timing is enforced on the Relay Box, rather than relying on a phone countdown alone.
Example circuit names at right are illustrations, not a statement that every pump, fan or light is within the finished relay rating.
Example only. These buttons don't connect to hardware. Real commands require confirmation from your Relay Box.
Connect your phone directly to the nearby Relay Box. No OUTTREK hub or internet connection is needed for that local control session.
Pair the Relay Box to a compatible nearby OUTTREK hub. Send remote commands through the hub when it has Wi-Fi or mobile internet.
Choose the connection owner in setup. Moving between direct phone ownership and hub ownership may require Forget relay device and re-pairing; this is not a claim of simultaneous phone-and-hub connections.
Pair your Relay Box and compatible sensors to a OUTTREK hub, then tell it what should happen automatically. A sensor reading can turn a relay on—and a different reading can turn it back off.
For example, set up your caravan's temperature sensor before you leave: switch Relay 1 on above 20°C, then off once the temperature falls below 15°C. Choose your own sensor, relay and temperature limits in the app.
It's not just temperature. Supported door states, water-leak detection and other compatible sensor conditions can trigger a relay too. Choose a supported turn-off condition or a timer to suit the job.
Saved rules run locally on the hub, even without Wi-Fi or LTE, while the hub, sensor and Relay Box remain powered and connected. Status is reported back to the server and app when internet is available.
Use the selected temperature sensor paired to your hub.
Request cooling through a suitable air-conditioning control interface.
Keep it on between the two thresholds until the off condition is reached. A separate off threshold helps avoid rapid switching around one temperature.
Example settings—not a recommended temperature or a guarantee of temperature control. Configure limits and operating requirements for your equipment.
Air conditioning must have a suitable manufacturer-approved control input or professionally installed, correctly rated interface. Do not connect mains air-conditioning power directly to the Relay Box. Keep the appliance's own protections in place. Not for life-safety or pet-safety temperature control.
Hub and sensors sold separately. This sensor automation requires a compatible hub; direct Bluetooth-only use does not run hub rules. Remote control is included with Plus or Enterprise. Essential does not support hub-linked relays.
Relay Box is intended for compatible low-voltage applications. Supply voltage, maximum current, switching ratings, fuse requirements and enclosure details will be published for the finished hardware before orders open.
Do not infer a rating from the number of channels. We don't advertise mains switching, waterproofing or universal appliance compatibility.
Use suitable fusing, wiring and professional installation where required. Firmware cannot replace electrical protection or a safe manual isolation method.
Tell us what you'd like to switch →No. Nearby direct Bluetooth control is free. Remote relay control is included with Plus or Enterprise and a compatible hub. Essential does not support hub-linked relays. No separate relay subscription is required.
Yes through an online compatible hub when remote access is active and the hub can reach the Relay Box over Bluetooth. A direct phone BLE connection alone only works nearby.
The Relay Box enforces the timer, but existing controller-disconnection and safety timeout behaviour can turn outputs off earlier. A power cut does not restart the timer when power returns.
Untimed output states are saved and can be restored on restart. The controller must reconnect within the existing 30-second safety lease or outputs turn off. Timed outputs remain off after a restart. It isn't an unattended always-on controller.
No. Compatibility depends on the finished product's voltage, current and switching ratings, circuit protection and installation. Ask OUTTREK before planning a load. No mains switching or safety-critical use is advertised.
Hardware is A$129, with free nearby Bluetooth control included. Launch enquiries are open. Confirm availability and electrical installation specifications before payment.
Tell us your circuits and whether you want nearby or remote control. We'll help check suitability before you order.